Delta AH500 Hardware Operation Manual page 596

Error
Description
code
The signal received by channel 1
exceeds the range of inputs
16#A801 which can be received by the
hardware. (The ERROR LED
indicator is OFF.)
The signal received by channel 2
exceeds the range of inputs
16#A802 which can be received by the
hardware. (The ERROR LED
indicator is OFF.)
The signal received by channel 3
exceeds the range of inputs
16#A803 which can be received by the
hardware. (The ERROR LED
indicator is OFF.)
The signal received by channel 4
exceeds the range of inputs
16#A804 which can be received by the
hardware. (The ERROR LED
indicator is OFF.)
The signal received by channel 5
exceeds the range of inputs
16#A805 which can be received by the
hardware. (The ERROR LED
indicator is OFF.)
The signal received by channel 6
exceeds the range of inputs
16#A806 which can be received by the
hardware. (The ERROR LED
indicator is OFF.)
The signal received by channel 7
exceeds the range of inputs
16#A807 which can be received by the
hardware. (The ERROR LED
indicator is OFF.)
C h a p t e r 1 2 Tr o u b l e s h o o t i n g
Remedy
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 1 exceeds
the range of inputs which can be received by the
hardware.
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 2 exceeds
the range of inputs which can be received by the
hardware.
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 3 exceeds
the range of inputs which can be received by the
hardware.
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 4 exceeds
the range of inputs which can be received by the
hardware.
Check the module parameter in HWCONFIG.
Check whether The signal received by channel 5 exceeds
the range of inputs which can be received by the
hardware.
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 6 exceeds
the range of inputs which can be received by the
hardware.
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 7 exceeds
the range of inputs which can be received by the
hardware.
1 2 - 4 7