Delta AH500 Hardware Operation Manual page 422

(2) After the users click Connect Devices on the Edit menu, or
connect the devices clicked to the new network added.
Additional remark
(a) If the devices selected do not conform to the principle described in (1), the system will not connect the
devices selected to a new network, and a warning message will appear.
(b) If a device selected has more than one port which is not connected to any network and matches the new
network added, the system will connect the port whose port number is smaller to the new network added.
(c) Users can select multiple devices by dragging a selection net around them. If the users press Ctrl+A on
the keyboard, all the devices and networks in the working area are selected.
(d) If users select a node which consists of a PLC and a module, and the PLC and the module conform to the
principle described in (1), the system will connect a port of the PLC and a port of the module to a new
network added.
(e) If the devices that users select have ports which are not connected to any networks, and can be
connected to an RS-485 network or an Ethernet network, the system will connect the ports to an Ethernet
network.
C h a p t e r 9 N e t w o r k C o n f i g u r a t i o n
on the toolbar, the system will
9 - 1 9