Delta AH500 Hardware Operation Manual page 339

A H 5 0 0 H a r d w a r e a n d O p e r a t i o n M a n u a l
Force
On (X/Y) Forcing the input contact or output contact selected ON
Off (X/Y) Forcing the input contact or output contact selected OFF
Release (X/Y) Releasing the contact from the locked state
Release All Releasing all the contacts from the locked states
If an output contact in the program is forced ON or OFF, the output state of this contact will not be affected by
the program execution result.
*. If the online monitoring function is disabled, the contacts will not be automatically released from the locked
states. As a result, users have to check whether the contacts need to be released from the locked states after the
test is complete.
There are two ways to create a monitoring table. Users can create a monitoring table online or offline.

Method 1
Click New Devices Table on the PLC menu, or

Method 2
Right-click Device Monitoring Table in the project management area, and click Add.
Type a table name in the Add Monitor Table window, and then click OK. An item will be under Device
Monitor Table in the project management area. If users want to open the monitoring table, they can double-
click the item. Besides, the users can create several monitoring tables in the project, and the monitoring tables
created will be saved with the project.
6 - 3 4
Description
on the toolbar.