Delta AH500 Hardware Operation Manual page 497

A H 5 0 0 H a r d w a r e a n d O p e r a t i o n M a n u a l
11.2.2.7 Uploading the Parameters Related to an Ether Link
Users can upload the parameters related to an Ether Link in a PLC.

Single node
Only the parameters related to an Ether Link in the node selected are uploaded. Before the users upload
the related parameters in a PLC, they have to make sure that the system connects to the PLC normally,
and they have completed the communication setting in NWCONFIG. Please refer to section 20.1.3 from
ISPSoft User Manual for more information.

Method 1
Select a data demanding node, and then click
related parameters by selecting a data demanding node, clicking the PLC menu, pointing to Transfer,
and clicking Upload (Single PLC).

Method 2
Select a data demanding node, right-click the data demanding node, and click Upload (Single PLC)
on the context menu.
11 - 4 8
on the toolbar. The users can also download the