Delta AH500 Hardware Operation Manual page 499

Hide thumbs Also See for AH500:

A H 5 0 0 H a r d w a r e a n d O p e r a t i o n M a n u a l

11.2.2.8 Deleting Asynchronous Device

If the setting of an Ether Link includes asynchronous devices, the system does not allow the Ether Link to be

monitored, and it does not allow the parameters related to the Ether Link to be downloaded. Users have to find

out the reason for the existence of the asynchronous devices. If the network configuration in NWCONFIG is

incorrect, the users have to modify the network configuration, and upload the parameters related to the Ether

Link again. If the parameters uploaded are not applicable to the current network configuration, the users can

delete the asynchronous devices.

Select an asynchronous device which will be deleted, and then click Delete This Asynchronous Node on the

Edit menu, or

on the toolbar.

If the users want to delete all the asynchronous devices at the same time, they can click Synchronize All

Nodes on the Edit menu, or

on the toolbar.

Chapters