Delta AH500 Hardware Operation Manual page 388

Hide thumbs Also See for AH500:

A H 5 0 0 H a r d w a r e a n d O p e r a t i o n M a n u a l

8.1.3.8 Ethernet – Advance: Email

Select the Email Function Enable checkbox, and then set the related parameters for the email-related

Select Email Function Enable to enable the function and then start setting the following parameters.

Set an IP address of SMTP server. Set the COM port of SMTP server at the COM port and set the

sender's email box at local email address. Type a mail subject as the start of the subject of every

Select Account identification checkbox to enable the function. Users can set to authenticate

themselves with a user name and a password before logging in to an SMTP server.

Type the target email address of a receiver.

Type a trigger name in Trigger Name box and a minimum interval in Trigger Min Cycle in the Trigger

Setting table. And then select a trigger condition on the drop-down list. When the sending condition is met, the

system will send an email every a period of time. But the same email will not be sent again within the set

Chapters