Delta AH500 Hardware Operation Manual page 486

11.2.2.2 Opening the Ether Link Configuration Window
Before users construct an Ether Link, they have to make sure that a network is set correctly. There are three
ways to open the Ether Link Configuration window.

Method 1
After the users select a network, they have to click Construct Ether Link on the Tools menu, or
the toolbar.

Method 2
Double-click a network.

Method 3
Right-click a network, and then click Construct Ether Link on the context menu.
C h a p t e r 11 C o n v e n i e n t F u n c t i o n s
on
11 - 3 7