Load Default; Load Default All; Status Menu; Upgrade Firmware - Tripp Lite NetController B042-004 Owner's Manual

3. Operation

3.3.7 Load Default

Return all daisy-chained KVM switches to factory default settings (e.g., computer names, Auto Scan time, Auto Logout, etc.). This option will not change or
disable password settings, ensuring the security of your KVM switch. Navigate to Load Default using
3.3.8 OSD Appearance
Keep or Hide the OSD Menu after switching ports.

3.4 Status Menu

Hit the F1 Key when inside the OSD Setup Menu to access the Status Menu.
The Status Menu shows the bank number, firmware version, model name and
number of ports..

4. Upgrade Firmware

All firmware upgrades for the B042-004, -008 and -016 KVM Switches will be available in the Support Section of www.tripplite.com. (If there are no up-
dates posted, there are none currently available.) Before downloading the firmware files, verify that the firmware version on the website is more current that
that of your KVM switch. You can find your KVM switches firmware version by navigating to the Status Page in the OSD. You can also use the Firmware
Upgrade Utility to check your firmware version. (See below) To perform a firmware upgrade on your B042-Series KVM Switch, follow these instructions.
Step 1: Using the provided Firmware Upgrade Cable, connect a standalone computer (one not already connected to the KVM Switches Server Port) to the
KVM Switch. If you have multiple KVM Switches daisy-chained together, connect the Firmware Upgrade Cable to the Master KVM Switch (the
first KVM in the daisy-chain). All KVM switches daisy-chained from the Master KVM switch will be upgraded simultaneously.
Step 2: Go to the Support section of www.tripplite.com and download the firmware upgrade utility and upgrade file.
Step 3: Before upgrading the firmware on your NetController KVM Switch, disable all running programs (anti-virus, system monitoring, etc.) on the stand-
alone computer you are using to perform the upgrade. These programs may prevent the firmware upgrade from completing successfully.
Step 4: Locate the .exe file you just downloaded and double-click on it. The KVM Upgrade Utility screen will open.
Figure 3-4: Firmware Select File Window
9
keys and hit 'Enter'.