Table of Contents
Advertisement
Receiving a Fax Message
sages will be rotated automatically to
fit on the paper.
3
Limitation
This feature is not available with
Polling Reception.
Note
You can choose to have received
messages printed from the a speci-
fied tray.⇒ P.265 "Specified Tray"
By default this feature is turned
off. Switch it on with the User Pa-
rameters.⇒ P.236 "Changing the
User Parameters"
This feature uses Memory Recep-
tion.
Rotate Sort
When both LT K and LT L copy pa-
per is loaded, A4 size incoming faxes
are delivered alternating by message
between K and L directions.
First Message
1
1
1
Second Message
2
2
Third Message
3
3
3
Rotate Sort is available with the fol-
lowing functions:
100
your machine
your machine
• Memory Reception
• Substitute Reception
• Confidential Reception
• Memory Lock Reception
• Lists and Reports
Limitation
This feature is not available with
Polling Reception.
If the Specified Tray function is
GFKAIR0N
turned on, output may not alter-
nate between K and L.
Two In One output is not available.
If the incoming message is wider
than LT width and neither LT K or
LT L paper is loaded, this feature
is not available.
When DLT paper is loaded, if you
receive long documents of LT
width, they are printed on DLT
size paper.
When Low Power Standby mode
is exited, the machine may not use
A4 K.
Note
When the machine is shipped, this
feature is turned off by default.
Turn it on or off with the User Pa-
rameters.⇒ P.236 "Changing the
User Parameters"
Page Separation and Length
Reduction (Not Available in
Some Countries)
When the size of a received message
is longer than the paper loaded in the
machine, each page of the message
can be split and printed on several
sheets, or reduced and printed on a
GFKAIS0N
single sheet. For example, when LT
L paper is loaded, this feature splits
the received message if the excess
Advertisement
Table of Contents
