Toyota 02-8FGF15 Operator's Manual page 38

01_A5028-0EA04_En.fm 37 ページ ２０１２年１２月６日 木曜日 午後１２時４２分
(1)
(1) Push
Closing
1. Lift up the engine hood and press the
hood damper lock to release the lock.
2. Close the engine hood quietly, and press
down on the hood until you hear a click-
ing sound.
Caution Caution
Working on the engine without firm locking
of the hood may be hazardous.
(1) (2) (3)
(4)
(5)
(6)
Engine hood
(Mini lever/Joy stick models)
Opening
1. Pull the lock release lever. tilt the steering
post forward.
(Swivel seat models)
2. Loosen the turning lever of the arm rest
and turn the arm rest on the inward side.
(Fabric seat models)
3. Pull up the slide lever and slide the seat to
the forward-most position.
(Mini-lever/joy stick models)
4. Pull up on the arm rest forward-backward
angular adjustment knob, and after tilting
the arm rests to the backward-most posi-
tion(Pre-cleana, working lamp models) or
to the forward-most position (Fabric seat
cabin models), lower the forward-back-
ward angular adjustment knob and lock it
in place.
5. Pull up on the arm rest forward-backward
angular adjustment lever, and after tilting
the arm rests forward, lower the forward-
downward angular adjustment lever and
again lock it in place.
(Compact, Cabin, LPG/ Rear pillar assist
gripped models)
Spring up the arm rest and lock it in
place.
(Conventional models other than those
above models)
6. Pulling up on the engine hood lock
release lever will release the engine hood
lock, and the engine hood will pop up
slightly.
7. Open the engine hood all the way, then
shake the hood slightly to check that the
hood damper has been securely fastened
before letting go.
en-37
en