Toyota 02-8FGF15 Operator's Manual page 31

01_A5028-0EA04_En.fm 30 ページ ２０１２年１２月６日 木曜日 午後１２時４２分
(1)
(1) Backward-and-forward position adjust-
ment knob
en-30
Arm rest
(Mini lever and Joy stick with Pre-
mium cabin models)
Before starting up the engine, adjust the arm
rest to set the optimum driving position.
Caution Caution
• After you have finished adjusting the
arm rest forward-backward position,
height and tilt, confirm that the knob
and the lever have been secured in place.
a loose knob or lever may cause an acci-
dent.
• When you adjust the arm rest position,
confirm by tightening the knob and lock
the arm rest securely. A loose knob may
cause an operational error.
• Do not adjust the position of the arm rest
while operating the vehicle.
• To operate the vehicle in safely, lock the
arm rest securely. Before operating the
vehicle, always confirm that the lever for
turning and securing the arm rest is
locked.
Adjusting the backward-and-forward posi-
tion
Pull up and loosen the forward-backward posi-
tion adjusting knob. Adjust the arm rest for-
ward-backward position. Then press the knob,
securing it in place.
(1)
(1) Height adjustment lever
(1)
(1) Tilt adjustment knob
(1)
(1) Turning lever
Adjusting the height position
Turn the lever counterclockwise to release the
lock. Then, move the arm rest up-and-down to
place it to an appropriate position. Turn lever
clockwise to lock.
Adjusting the tilt position
Lift and loosen the tilt adjustment knob
counter clockwise to adjust the tilt of the arm
rest. This lever is also used in order to spring
up the arm rest.
Adjusting the turning position
Lift and loosen the turning lever counter clock-
wise to turn the arm rest from side to side.
This lever is used in order to turn the arm rest
when you open and close the engine hood.