Toyota 02-8FGF15 Operator's Manual page 20

01_A5028-0EA04_En.fm 19 ページ ２０１２年１２月６日 木曜日 午後１２時４２分
Over-speed alarm
(Only for DX models)
When the set traveling speed is exceeded, the
speed meter will blink and a warning will
sound to notify the operator.
Note:
This function does not limit traveling speed
and is an indication only. Pay attention to your
speed when operating the vehicle.
Setting menu screen
With the Multifunction display, pressing the
low speed setting switch or the down switch in
the standard screen for more than 2 seconds
will display the setting menu screen.
Note:
When the supervisor locks the menu, these
screen settings can not be displayed.
Selecting the options using the low speed set-
ting switch or the down switch and then press-
ing the meter display switch will display each
screen setting.
Select [ ] in the setting menu screen,
and then pressing the meter display switch will
return to the standard screen.
Note:
Always operate the switch panel using your
finger tips.
Vehicles having Multifunction display DX
(1) (2)
<Standard screen>
<Setting menu screen>
<Over-speed alarm setting screen>
(1) Down switch
(2) Meter display switch
en-19
en