Toyota 02-8FGF15 Operator's Manual page 30

01_A5028-0EA04_En.fm 29 ページ ２０１２年１２月６日 木曜日 午後１２時４２分
Mini lever models
Joy stick models
(1)
(1) Backward-and-forward position adjust-
ment knob
Arm rest
(Mini lever and Joy stick models)
Before starting up the engine, adjust the arm
rest to set the optimum driving position.
Caution Caution
• After you have finished adjusting the
arm rest forward-backward position,
height and tilt, confirm that the knob
and the lever have been secured in place.
A loose knob or lever may cause an acci-
dent.
• Do not adjust the position of the arm rest
while operating the vehicle.
• To operate the vehicle in safely, lock the
arm rest securely. Before operating the
vehicle, always confirm that the lever for
turning and securing the arm rest is
locked.
Adjusting the backward-and-forward posi-
tion
Pull up and loosen the forward-backward posi-
tion adjusting knob. Adjust the arm rest for-
ward-backward position. Then press the knob,
securing it in place.
(1)
(1) Height adjustment knob
(1)
(1) Tilt adjustment lever
Adjusting the height position
Turn the knob counterlockwise to release the
lock.Then, move the arm rest up-and-down to
place it to an appropriate position. Turn knob
clockwise to lock.
Adjusting the tilt position
Lift and loosen the lever for turning and secur-
ing the arm rest. Adjust the tilt of the arm
rest.Then push the lever down,securing it in
place.This lever is used in order to turn the arm
rest when you open and close the engine hood.
en-29
en