Instruments - Toyota 02-8FGF15 Operator's Manual

01_A5028-0EA04_En.fm 11 ページ ２０１２年１２月６日 木曜日 午後１２時４２分

INSTRUMENTS

1 2 3
5 6 8 9 10 11
12 13
Gasoline engine models
1 2 3
4 5 7 8 9 10 11 12 13
Diesel engine models
Combination meter
Meters and warning lamps are arranged as
shown in the left figures.
1. Water temperature gauge
2. Hour meter
3. Brake warning lamp
(OK monitor: Option)
4. Sedimenter warning lamp
(Diesel engine models)
5. Fuel gauge
6. Engine check lamp
(Gasoline engine models)
7. Glow indicator lamp
(Diesel engine models)
8. Engine oil pressure warning lamp
9. Charge warning lamp
10. OPS lamp
11. Diagnosis lamp
12. Air cleaner warning lamp
(OK monitor: Option)
13. Coolant level warning lamp
(OK monitor: Option)
(1)
(1) Start
Warning lamp check method
Please check if all warning lamps come on
when the ignition switch is turned to ON.
Note:
Use the light control switch to check the meter-
lighting lamp.
Caution Caution
• The glow indicator lamp (Diesel engine
models) is only on for 2 seconds when the
engine coolant temperature exceeds
50°C.
• If a lamp does not light up, contact your
Toyota dealer to request an inspection.
Hour meter also serving as diagno-
sis indicator
The hour meter operates when the ignition
switch is turned to ON. It indicates the total
number of vehicle operating hours.
The unit of the right most digit is 1/10 hour.
Please use this meter for the timing of periodic
maintenance and recording the operation
hours.
When an abnormality occurs to the vehicle
(diagnosis lamp lights up or blinks) the error
code and hour meter will be alternately dis-
played.
Caution Caution
Should an error code be displayed, park the
vehicle in a safe location and contact your
Toyota dealer to request an inspection.
en-11
en