Table of Contents
Advertisement
4.5.7.
System Security Configuration
On the Basic Switch Configuration Menu, pressing "S" opens the System Security
Configuration screen, as shown in Fig. 4-17. On this screen, you can configure the
various settings for accessing this Switching Hub for configuration and manage-
ment.
PN28168 Local Management System
Basic Switch Configuration -> System Security Configuration
Console UI Idle Timeout:
Telnet UI Idle Timeout:
Telnet Server:
SNMP Agent:
Web Server Status:
IP Setup Interface:
Local User Name:
Syslog Transmission:
Login Method 1:
Login Method 2:
-------------------------------- <COMMAND> -----------------------------------
Set [C]onsole UI Time Out
Set [T]elnet UI Time Out
Enable/Disable Te[l]net Server
[W]eb Server Status
LED [B]ase Mode Configuration
[R]ADIUS Configuration
Enable/Disable S[y]slog Transmission L[o]gin Method
Change Local User [N]ame
Command>
Enter the character in square brackets to select option
5 Min.
5 Min.
Enabled
Disabled
Disabled
Enabled
manager
Disabled
Local
None
Fig. 4-17 System Security Configuration
Change Local [P]assword
Enable/Disable [S]NMP Agent
[I]P Setup Interface
Telnet [A]ccess Limitation
Syslo[g] Transmission Configuration Page
SS[H] Server Configuration
[Q]uit to previous menu
55
Advertisement
Table of Contents
