Static Multicast Address - Panasonic PN28240i-ID Operation Manual

4.7.11. Static Multicast Address

On the Advanced Switch Configuration Menu, pressing "U" opens the Static
Multicast Address Table Menu, as shown in Fig. 4-7-33. On this screen, you
can set the forwarding multicast group to the specific port only.
PN28240i Local Management System
Advanced Switch Configuration -> Static Multicast Address Table Menu
VLAN ID Group MAC Address Group Members
------- ----------------- --------------------------------------------------
1 01:00:5E:00:00:00
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[A]dd Static Member Port [D]elete Static Member Port
Command>
Enter the character in square brackets to select option
Fig. 4-7-33 Digital Diagnostic Monitoring Menu
Screen Description
VLAN ID Shows the VLAN ID of multicast group.
Group MAC Shows the MAC address of multicast group.
Address
Group Members Shows the ports of multicast group.
1
[P]revious Page
226
[Q]uit to previous menu