Setting The Print Driver Properties On Macintosh - Xerox DocuColor 1632 Printing User Manual
Hide thumbs
Also See for DocuColor 1632:
- Service manual (1064 pages) ,
- User manual (112 pages) ,
- Safety notes (15 pages)
Table of Contents
Advertisement
U
G
( P
)
S E R
U I D E
R I N T
Setting the Print Driver Properties on Macintosh
Memory
Output Tray
Paper Detect by Tray
2 – 6 6
This section describes printer specific settings included in the print
driver properties.
NOTE:
Typically, Installable Options is automatically set according
to the 1-directional communications with the printer. It is not
necessary to change the setting.
•
Installable Options on the Option menu
•
Printer Specific Options
Configure Settings
This describes Installable Options.
NOTE:
In order to print correctly, it is necessary to make
appropriate settings in this tab.
1
Select the printer using the Chooser and select Setup. The
Current Printer Description File (PPD) Selected screen is
displayed.
2
Select Configure on the Current Printer File (PPD) Selected
screen. The Installable Options list is displayed.
3
Set the option menu items in Installable Options. Select OK.
Settings
Specify the amount of printer memory.
•
The default setting is Standard 512MB
Set the destination for the output.
•
The items that can be selected vary according to whether
Finisher has been installed.
Specify either Statement Paper Detection, or A5 Paper Detection.
Advertisement
Table of Contents
