9 Utility Functions
9.6
Initializing Parameter Settings
This function is used when returning to the factory settings after changing parameter settings.
(1) Preparation
The following conditions must be met to initialize the parameter values.
• The write prohibited setting parameter must be set to Write permitted.
• The servomotor power must be OFF.
(2) Operating Procedure
Use the following procedure.
1.
In the SigmaWin+ main window, click Parameters - Edit Parameters.
The Parameter Editing dialog box will appear.
9-16
• Be sure to initialize the parameter settings while the servomotor power is OFF
• After initialization, restart the SERVOPACK to validate the settings.
.