YASKAWA E-V-MD Series User Manual page 255

5.
Click Measurement complete.
6.
If setting the parameters to the values shown in the measurement results, click Result Writing.
(3) Related Parameters
The following parameters are either referenced or automatically changed during execution of EasyFFT.
Do not change the settings of these parameters from the SigmaWin+ or any other means during execution of
EasyFFT.
Parameter
Pn408 Torque Related Function Switch
Pn409 1st Notch Filter Frequency
Pn40A 1st Notch Filter Q Value
Pn40C 2nd Notch Filter Frequency
Pn40D 2nd Notch Filter Q Value
Pn456 Sweep Torque Reference Amplitude
Name
9.13 EasyFFT
Automatic
changes
Yes
Yes
No
Yes
No
No
9
9-33