YASKAWA E-V-MD Series User Manual page 298

Parameter
Size Name
No.
Input Signal Selection
2
(/DEC Signal Assignment)
4th 3rd 2nd 1st
digit digit digit digit
n.    
Pn592
Input Signal Selection
2
(/EXT1 Signal Assignment)
4th 3rd 2nd 1st
digit digit digit digit
n.    
Pn593
Setting Factory
Units
Range Setting
0000 to
−
0000
2007
/DEC Signal Pin Number Assignment
0 Selects sequence input signal /SI-0.
1 Selects sequence input signal /SI-1.
2 Selects sequence input signal /SI-2.
3 Selects sequence input signal /SI-3.
4 Selects sequence input signal /SI-4.
5 Selects sequence input signal /SI-5.
6 Selects sequence input signal /SI-6.
7 Selects sequence input signal /SI-7.
Reserved (Do not change.)
Reserved (Do not change.)
/DEC Signal Assignment Selection
0
/DEC signal assignment disabled. [factory setting]
1 /DEC signal assigned. Signal is ON for low level.
2 /DEC signal assigned. Signal is ON for high level.
0000 to
−
0000
2007
/EXT1 Signal Pin Number Assignment
0 Selects sequence input signal /SI-0.
1 Selects sequence input signal /SI-1.
2 Selects sequence input signal /SI-2.
3 Selects sequence input signal /SI-3.
4 Selects sequence input signal /SI-4.
5 Selects sequence input signal /SI-5.
6 Selects sequence input signal /SI-6.
7 Selects sequence input signal /SI-7.
Reserved (Do not change.)
Reserved (Do not change.)
/EXT1 Signal Assignment Selection
0 /EXT1 signal assignment disabled. [factory setting]
1 /EXT1 signal assigned. Signal is ON for low level.
2
/EXT1 signal assigned. Signal is ON for high level.
11.2 List of Parameters
When
Classification Profile
Enabled
After restart Setup
After restart Setup
(cont'd)
Reference
Section
− −
− −
11
11-15