YASKAWA E-V-MD Series User Manual page 70

 Type A02 SERVOPACK
• Main Circuit Power Supply Pins
Connector
Main circuit power supply
connector
• Parts and Functions of the Main Circuit Power Supply Connector (CN32)
Pin No. Signal
1, 2, 3, 4 L1
5, 6, 7, 8 L2
9, 10 FG
Note: Connect the power supply cable to all 10 pins.
• Power Supply Capacity and Wire Size
Main Circuit
Power Supply
Continuous Rating
24 VDC
48 VDC
Note: The input power supply capacity is the capacity per axis.
The actual input current for the main circuit power supply will be up to eight times the given value if you control
servomotors for eight axes.
Select the wire size according to the number of axes that you will use.
Housing
Cable side: VHR-10N,
SERVOPACK side: B10P-VH
Name
Main circuit power supply input terminal + 24 VDC -10% to +15% or
Main circuit power supply input terminal -
Ground terminal
Input Current Capacity
Maximum Instantaneous
Current
3.5 A
2.0 A
5.1 Wiring the Main Circuit and Control Power Supplies
Contacts
SVH-41T-P1.1 J.S.T. Mfg. Co., Ltd.
48 VDC -15% to +10%
–
8.5 A
AWG16 to AWG18
10.5 A
Manufacturer
Specification
Wire Size
5-5
5