YASKAWA E-V-MD Series User Manual page 295

11 Appendix
11.2.1 List of Parameters
Parameter
Size
No.
Notch Filter Adjustment
2
Switch
4th 3rd 2nd 1st
digit digit digit digit
n.    
Pn460
Brake Reference -
Pn506 2
Servo OFF Delay Time
Brake Reference Output
Pn507 2
Speed Level
Waiting Time for Brake
Pn508 2 Signal When Motor
Running
Pn509 2 Reserved (Do not change.)
Excessive Position Error
Pn51E 2
Warning Level
Excessive Position Error
Pn520 4
Alarm Level
Pn52B 2 Overload Warning Level
Derating of Base Current
Pn52C 2 at Detecting Overload of
Motor
11-12
Setting
Name
Range
0000 to
0101
Notch Filter Adjustment Selection 1
0
Does not adjust 1st step notch filter automatically using utility function.
1 Adjust 1st step notch filter automatically using utility function.
Reserved (Do not change.)
Notch Filter Adjustment Selection 2
0 Does not adjust 2nd step notch filter automatically using utility function.
1 Adjust 2nd step notch filter automatically using utility function.
Reserved (Do not change.)
0 to 50
0 to 10000
10 to 100
−
10 to 100
1 to
1073741823
1 to 100
10 to 100
Factory When
Units
Setting Enabled
− 0101 Immediately
10 ms 0 Immediately
-1
100 Immediately
1 min
10 ms 50 Immediately
− 20 −
1% 100 Immediately
1
refer-
5242880 Immediately
ence
unit
1% 20 Immediately
1% 100 After restart
(cont'd)
Reference
Classification Profile
Section
8.2.1,
Tuning − 8.3.1,
8.5.1
−
Setup 7.3.4
−
Setup 7.3.4
−
Setup 7.3.4
− −
Setup – 10.3.1
8.1.4,
Setup –
10.2.1
Setup – 7.3.6
Setup – 7.3.6
−