3.
Click Edit.
The Edit box for the selected parameter will appear.
4.
Change the value of the parameter.
<For parameters for numeric settings>
Enter the value to be set.
<For parameters for selecting functions>
Click the arrow to open the setting list for each digit and select one item in each list.
5.
Click OK.
6.
Click Write.
The new parameter settings will be saved in the SERVOPACK.
This completes the editing of the parameter. If the following window appears, go to step 7.
7.
Click OK.
8.
To enable the change in the setting, restart the SERVOPACK.
6.5 Parameters (Pn)
6-9
6