Differential Lock Switch - Toro ProLine H800 Service Manual

Differential Lock Switch

g294695
1. Differential lock switch
Testing the Differential Lock Switch
Electrical System: Testing the Electrical Components
The differential lock switch is located on the dash panel
The differential lock switch controls the operation of the differential lock.
g294694
1. Park the machine on a level surface, lower the cutting deck, set the parking
brake, and shut off the engine.
2. Disconnect the battery negative (-) cable at the battery.
3. Remove the dash panel and get access to rear of the differential lock switch;
refer to Disassembling the Body Assembly (page
4. Disconnect the wire harness connector from the differential lock switch and
remove the differential lock switch from the dash panel.
Figure 113
Figure 114
Page 6–16
(Figure 113).
7–6).
ProLine H800
19241SL Rev A