Servicing The Blade Spindle - Toro ProLine H800 Service Manual

Servicing the Blade Spindle

g290843
1. Grease fitting
2. Bolt
3. Seal
4. Thrust washer
5. Pulley
6. Cover
7. Bearing
Disassembling the Blade Spindle
ProLine H800
19241SL Rev A
8. Shaft key
9. LH spindle shaft
10. Nut
11. Washer
12. Spindle hub
13. Spacer
14. Bearing
1. Remove the grease fitting (1) from the bolt (2).
2. Remove the bolt (2), seal (3) and thrust washer (4) that secures the pulley (5
or 17) to the spindle shaft.
3. Slide and remove the pulley from the spindle shaft.
4. Locate and retrieve the shaft key (8).
5. Remove the cover (6) from the spindle hub.
Figure 175
15.
16.
17.
18.
19.
20.
Page 10–9
Oil seal
Retaining ring
Pulley
Center spindle shaft
RH spindle shaft
Socket head screw
Cutting Unit: Service and Repairs