Transport Latches; Differential Lock; Speed Control Pedal - Toro 650D Operator's Manual

1.28

TRANSPORT LATCHES

WARNING : PREVENT ACCIDENTS - ALWAYS raise the
cutterheads to the transport position and secure with the transport
latches and safety locks when travelling between work areas.
Front cutterhead transport latches:
Centre cutterhead transport latch:

DIFFERENTIAL LOCK

WARNING : PREVENT ACCIDENTS - Do not engage the
differential lock at high speed. The turning circle will increase with
the differential lock engaged.
The differential lock operates in both 'forwards' and 'reverse' and can be
engaged whilst the mower is travelling slowly.
differential lock to prevent excessive wheel spin when the drive wheels
lose traction. Engine power demand increases when the differential lock
is engaged. Prevent excessive power requirements by operating with
differential lock at SLOW speed.
Engaging differential lock: Depress the differential lock pedal.
Disengaging differential lock: Release the differential lock pedal.

SPEED CONTROL PEDAL

The speed control pedal can be adjusted to provide two speed ranges.
Securing the speed control cable through hole 'A' will provide 0-22 km/hr
(0-14 mph) forward and 0-11 km/hr (0-7 mph) reverse. Securing the cable
through hole 'B' will provide 0-19 km/hr (0-12 mph) forward and
0-8 km/hr (0-5 mph) reverse.
WARNING: PREVENT ACCIDENTS - Ensure that the control cable
is securely fastened to the travel control pedal mechanism. Ensure
that both the cable and pedal articulate freely through their full
range of travel and that the mechanism freely returns to neutral
when released.
WARNING: PREVENT ACCIDENTS - Ensure that the control cable
is correctly routed underneath the operator platform such that it is
clear of any obstructions and impediments to its operation.
OPERATING THE MOWER
1
2
2
1. Transport latch.
2. Safety lock.
Engage the
Section through
operator platform
3D924S03A
1.28
1
2
1
1D924P07A
Speed
control pedal
B
A
Speed control cable
111-1033TH051006