Caster Wheel And Flat Frame Assembly - Toro ProLine H800 Service Manual

Caster Wheel and Flat Frame Assembly

g290949
1. Cap
2. Retaining ring
3. Bearing
4. Bolt
5. Washer
6. Caster fork
7. Nut
Disassembling the Caster Wheel and Flat Frame Assembly
Cutting Unit: Service and Repairs
8. Washer
9. Nut
10. Plate
11. Split pin
12. Pin
13. Flange bushing
14. Caster wheel
1. Park the machine on a level surface, raise the cutting deck, shut off the
engine, set the parking brake, and remove the key from the key switch.
2. Disassemble the caster wheel as needed using the
3. Disassemble the flat frame assembly as needed using the
a guide.
Figure 177
15.
16.
17.
18.
19.
20.
Page 10–12
Bolt
Footrest
Flat frame assembly
Retaining ring
Pin
Cutting deck
Figure 177 as a guide.
Figure 177
ProLine H800
19241SL Rev A
as