Toro ProLine H800 Service Manual page 153

Installing the Hydraulic Pump Assembly (continued)
ProLine H800
19241SL Rev A
Ensure that you do not damage the machine components while
installing the hydraulic pump.
4. Carefully position the hydraulic pump assembly onto the engine.
5. Secure the hydraulic pump assembly to the engine with the 2 washers and
2 bolts.
6. Use the labels that you attached during the removal process to correctly
connect the hydraulic hoses and tubes to the fittings on the hydraulic pump;
refer to Installing the Hydraulic Hoses and Tubes (page
7. Install the traction neutral arm assembly onto the hydraulic pump assembly;
refer to Installing the Traction Neutral Arm Assembly (page
8. Check the hydraulic-fluid level in the hydraulic reservoir and add correct
quantity of fluid if necessary; refer to the Operator's Manual.
9. Operate the machine functions slowly until air is out of system; refer to
Charging the Hydraulic System (page
10. Check and adjust the traction rod for neutral; refer to Operator's Manual.
IMPORTANT
5–72).
Page 5–85
5–8).
5–81).
Hydraulic System: Service and Repairs