Toro ProLine H800 Service Manual page 141

Charging the Hydraulic System (continued)
ProLine H800
19241SL Rev A
15. Ensure that the traction pedal returns to the NEUTRAL position when
released from the forward or reverse direction and adjust if necessary; refer
to the Operator's Manual.
16. Check the operation of the traction interlock switches; refer to
Operation of the Interlock Switches (page
17. If the hydraulic pump was replaced or rebuilt, operate the traction circuit so
that all the wheels rotate slowly for 10 minutes.
18. Operate the machine by gradually increasing its work load to full over a 10
minute period.
19. Stop the machine. Check the hydraulic-fluid level in the hydraulic tank and
add correct quantity of fluid if necessary; refer to the Operator's Manual.
20. Check the hydraulic components for leaks and tighten any loose connections.
6–5).
Page 5–73
Checking the
Hydraulic System: Service and Repairs