Toro ProLine H800 Service Manual page 105

Testing the Traction Circuit - Charge Pressure (continued)
ProLine H800
19241SL Rev A
18. After you complete the charge pressure testing, release hydraulic system
pressure; refer to Releasing Pressure from the Hydraulic System (page
Remove the pressure gauges and install the hydraulic pressure test ports.
19. Rotate and lock the radiator in correct position.
20. Start the engine, check for hydraulic fluid leaks, repair any leaks as required,
and fill the hydraulic tank with the correct quantity of new hydraulic fluid
before returning the machine to service.
Page 5–37 Hydraulic System: Testing the Hydraulic System
5–5).