Safety Instructions; Supervisor's Responsibilities - Toro ProLine H800 Service Manual

Safety Instructions

Supervisor's Responsibilities

Safety: Safety Instructions
The ProLine H800 machines are tested and certified by Toro for compliance
with existing safety standards and specifications. Although hazard control and
accident prevention are partially dependent upon the design and configuration of
the machine, hazard control and accident prevention are also dependent upon
the awareness, concern and proper training of the personnel involved in the
operation, transport, maintenance and storage of the machine. Improper use or
maintenance of the machine can result in injury or death. To reduce the potential
for injury or death, comply with the following safety instructions.
To reduce the potential of injury or death, comply with the following
safety instructions as well as information found in the Operator's
Manuals.
1. Ensure that the operators are fully trained and familiar with the Operator's
Manual, all of the operating and safety decals on the machine and any
operation information found in the Installation Instructions for accessories
that are installed on the machine.
2. Establish your own special procedures and work rules for unusual operating
conditions (e.g., slopes too steep for machine operation). Survey the mowing
site completely to determine hills on which you can operate safely. When
performing this site survey, always understand and take into consideration
the turf condition and rollover risk.
WARNING
Page 1–2 ProLine H800
19241SL Rev A