Table of Contents
Advertisement
Differential Lock
WARNING
The turning radius increases when the differential
lock is engaged. Using the differential lock at high
speed may lead to loss of control and cause serious
injury and/or property damage.
Do not use the differential lock at high speed.
Use the differential lock to prevent excessive wheel spin when
the drive wheels lose traction. The differential lock operates
in both forward and reverse. You can lock the differential
while the machine is traveling slowly. Engine power demand
increases when the differential is locked. Prevent excessive
power requirements by using the differential lock only at low
speed.
To lock the differential, press the differential-lock switch.
To unlock the differential, release the differential-lock switch.
Cutting-Units Position Controls
Use the cutting-units position controls to independently raise
and lower the cutting units; refer to
of the Individual Cutting Units (page
Transport Latches
Always raise the cutting units to the T
and secure with the transport latches and safety locks when
travelling between work areas
Controlling the Position
28).
position
RANSPORT
(Figure
9).
G014548
Figure 9
Cutting-Unit-Drive Switch
To engage the cutting unit drive, refer to
Cutting Unit Drive (page
Note: Always put the cutting-unit-drive switch in the O
position when travelling between work areas.
Adjustable Steering Column
WARNING
The steering column may cause injury if it is not in
working order.
Check that the steering column adjuster mechanism
is in good working order and that, once adjusted
and locked, the steering wheel remains securely in
position.
Adjustment of the steering wheel and steering column should
only be carried out when the mower is at a standstill with
the parking brake engaged.
1. To tilt the steering wheel, press the foot pedal down.
2. Position the steering tower to the most comfortable
position and release the pedal
15
Engaging the
29).
(Figure
10).
G014549
Figure 10
FF
Hide quick links:
Advertisement
Table of Contents
