Toro ProLine H800 Service Manual page 166

Removing the Rear Wheel Motor (continued)
g293687
1. Hydraulic filter
2. O-ring
3. Adaptor
4. T-fitting
5. Front right wheel motor 12.
6. Fitting
7. Hose
Hydraulic System: Service and Repairs
8. Differential valve
9. Fitting
10. Hose
11. Front left wheel motor
Hose
13. Bolt
14. O-ring
8. Clean the hydraulic hose ends and fittings on the wheel motor to prevent
contaminants from entering into the hydraulic system.
9. For assembly purposes, label all the hydraulic connections at the wheel
motor.
Figure 80
15. Hose
16. Hose
17. Hydraulic pump
18. Fitting
19. Rear right wheel motor
20. Hose
21. Hose
Page 5–98
22. O-ring
23. Fitting
24. T-fitting
25. Plug
26. Rear left wheel motor
27. Hose
ProLine H800
19241SL Rev A