Toro ProLine H800 Service Manual page 56

Removing the Radiator
Engine: Service and Repairs
1. Park machine on a level surface, lower cutting deck, shut off the engine,
engage parking brake, and remove key from the key switch.
2. Raise and lock the hopper assembly; refer to Operator's Manual.
If the radiator or engine is hot, pressurized hot coolant can escape
and cause burns.
Do not open the radiator cap or drain the radiator when the coolant
is hot.
Ethylene-glycol antifreeze is poisonous.
Keep the coolant away from children and pets.
Keep the coolant in a labelled container.
Discard the coolant in accordance with local hazardous waste
ordinances.
g215339
1. Handle
3. Push the latch on the radiator inward toward the radiator
4. Using the handle on the side of the radiator, rotate the radiator
5. Drain coolant from the radiator; refer to the Operator's Manual.
Follow all local codes and regulations when recycling or disposing
engine coolant.
6. Remove the screen from machine; refer to the Operator's Manual.
DANGER
WARNING
Figure 15
2. Latch
IMPORTANT
Page 4–8
(Figure 15).
(Figure 15).
ProLine H800
19241SL Rev A