Pto Electric Clutch - Toro ProLine H800 Service Manual

PTO Electric Clutch

g290631
1. Bolt
2. Washer
3. Bushing
4. Bracket
5. Spring
6. Electric clutch
Testing the PTO Electric Clutch
ProLine H800
19241SL Rev A
An electric clutch is used to engage the PTO. The electric clutch is mounted on
the engine crankshaft and engages when current is applied to the clutch. The
clutch also incorporates a magnetic brake to stop the clutch rotation when the
clutch is de-energized.
1. Park the machine on a level surface, lower the cutting deck, set the parking
brake, shut off the engine, and remove the key from the key switch.
2. Locate the PTO electric clutch on the engine crankshaft
Figure 131
7. Woodruff key
8. Bolt
9. Washer
10. Drive shaft
11. Engine
Page 6–35 Electrical System: Testing the Electrical Components
(Figure 131).