General Information; Traction Unit Operator's Manual; Yanmar Service Manuals - Toro ProLine H800 Service Manual

General Information

Traction Unit Operator's Manual

Yanmar Service Manuals

Engine: General Information
This chapter gives information about the repair of the Yanmar diesel engines
used in the ProLine H800 machine. The general maintenance procedures
are described in the Operator's Manual. Detailed information on engine
troubleshooting, testing, disassembly, and assembly are identified in the
3TNV76 Service Manual
Additionally, some engine repair procedures are described in this manual. The
described adjustments and repairs require tools which are commonly available in
many service shops. Special tools are described in the
Manual and Yanmar 3TNV80F Service
test equipment is explained. However, the cost of the test equipment and the
specialized nature of some repairs may dictate that the work be done at an
engine repair facility.
Service and repair parts for the Yanmar engines are supplied through your
Authorized Toro Distributor. If the parts list is not available, provide your
distributor with the Toro model and serial number of your machine as well as the
Yanmar engine model and serial numbers.
The Operator's Manual provides information regarding the operation, general
maintenance, and maintenance intervals for your machine. Refer to the
Operator's Manual for additional information when servicing the machine.
The engine that powers your ProLine H800 for model 31050 is 3TNV76–XGZ
(Tier 3 compliant) and for model 31050TE is 3TNV80-NXDGZ (Tier 4 compliant)
engines. The Yanmar 3TNV76 Service Manual
Manual are available for these engines. Ensure that the correct engine manual is
used when servicing the engine on your machine.
and Yanmar 3TNV80F Service
Manual. The use of some specialized
Page 4–2
Manual.
Yanmar 3TNV76 Service
and Yanmar 3TNV80F Service
ProLine H800
19241SL Rev A
Yanmar