Toro ProLine H800 Service Manual page 195

Chute Cleaning Cylinder
g294112
1. Cutting deck
2. Bolt
3. Washer
4. Lever
Removing the Chute Cleaning Cylinder
ProLine H800
19241SL Rev A
5. Pin
6. Hydraulic cylinder
7. Split pin
8. Fork
1. Park the machine on a level surface, lower the cutting deck, shut off the
engine, set the parking brake, and remove the key from the key switch.
2. Read the General Precautions for Removing and Installing the Hydraulic
System Components (page
3. For assembly purposes, label all the hydraulic connections. Clean the
hydraulic connections before loosening the hydraulic lines from the chute
cleaning cylinder.
Figure 98
10.
5–63).
Page 5–127
9. Bronze bushing
Scraper
Hydraulic System: Service and Repairs