Toro ProLine H800 Service Manual page 52

Installing the Air Cleaner Assembly
Engine: Service and Repairs
Any leaks in the air cleaner system will allow the dirt into the engine
and will cause serious engine damage. Ensure that all air cleaner
components are in good condition and are properly secured during
installation.
g288971
1. Air cleaner body
2. Safety filter
3. Primary filter
1. Assemble the air cleaner
A. Ensure that the dust cap is pointed down after installation.
B. If the air cleaner indicator was removed from the air cleaner, install the air
cleaner indicator onto the air cleaner.
2. After air cleaner has been properly installed, install and secure the engine
covers.
3. Unlock and lower the hopper assembly; refer to Operator's Manual.
IMPORTANT
Figure 12
4. Air cleaner cover
5. Dust cap
(Figure 12).
Page 4–4 ProLine H800
19241SL Rev A