Toro ProLine H800 Service Manual page 170

Servicing the Hydraulic Wheel Motor (continued)
Hydraulic System: Service and Repairs
Note: The wheel motors used in this machine are the Parker Torqmotor™
motors of the same basic design with minor differences. The 2 front wheel
motors displace 238 cm³/rev (14.5 in³/rev) and the 2 rear wheel motors displace
195 cm³/rev (11.8 in³/rev).
Note: For the wheel motor repair procedures; refer to
Service Procedure (TF, TG, TH, and TL
Note: If a wheel motor fails; refer to the
(page 5–6) for information regarding the importance of removing contamination
from the traction circuit.
Series).
Traction Circuit Component Failure
Page 5–102
Parker Torqmotor™
ProLine H800
19241SL Rev A