Toro ProLine H800 Service Manual page 256

Installing the Wheels
Chassis: Service and Repairs
1. Install the wheel to the machine with the wheel-lug nuts or bolts.
2. Lower the machine to the ground.
g034007
Failure to maintain proper torque could result in failure or loss of
wheel and may result in personal injury.
Maintain the proper torque of the wheel-lug nuts or bolts.
3. Torque the wheel-lug nuts or bolts evenly to 85 to 90 N∙m (62 to 66 ft-lb)
in a crossing pattern
4. Check and adjust the tire pressures; refer to Operator's Manual.
Figure 140
WARNING
(Figure 140).
Page 7–4 ProLine H800
19241SL Rev A