Radiator Fan Reversal Switch
g294696
1.
Radiator fan reversal switch
Testing the Radiator Fan Reversal Switch
Electrical System: Testing the Electrical Components
The radiator fan reversal switch is located on the dash panel
The radiator fan reversal switch controls the direction of airflow through the
radiator fan.
g294694
1. Park the machine on a level surface, lower the cutting deck, set the parking
brake, and shut off the engine.
2. Disconnect the battery negative (-) cable at the battery.
3. Remove the dash panel and get access to rear of the radiator fan reversal
switch; refer to
Disassembling the Body Assembly (page
4. Disconnect the wire harness connector from the radiator fan reversal switch
and remove the radiator fan reversal switch from the dash panel.
Figure 115
Figure 116
Page 6–18
(Figure
115).
7–6).
ProLine H800
19241SL Rev A