Toro ProLine H800 Service Manual page 280

Installing the Rear Axle (continued)
Axle and PTO: Service and Repairs
13. Check and adjust the steering stops; refer to Operator's Manual.
14. Lower the machine and install the hopper assembly; refer to
Hopper Assembly (page
15. Check the hydraulic-fluid level in the hydraulic tank and add correct quantity
of fluid if necessary; refer to the Operator's Manual.
16. Ensure that there is no contact between the machine components including
hydraulic hoses while the rear wheels move lock to lock. Adjust if necessary.
17. Operate the machine and check for hydraulic-fluid leaks, repair any leaks
as necessary.
9–4).
Page 8–8
Installing the
ProLine H800
19241SL Rev A