Locate The Server; Prevent Esd Damage - Oracle SPARC M8 Service Manual

a. Locate the manufacturing sticker on the front of the server or on the sticker
on the side of the server.
b. At the Oracle ILOM prompt, type:
-> show /System serial_number
/System
->
Related Information
"Locate the Server" on page 61
■

Locate the Server

1. At the Oracle ILOM prompt, type:
-> set /System locator_indicator=on
Set 'locator_indicator' to 'on'
The white Locator LEDs (one on the front panel and one on the rear panel) blink.
2. After locating the server with the blinking Locator LED, turn it off by pressing the
Locator button.
Alternatively, you can turn off the Locator LED by setting the value to off.
Note -
Related Information
"Interpreting LEDs" on page 44
■

Prevent ESD Damage

Many components housed within the chassis can be damaged by ESD. To protect these
components from damage, perform the following steps before opening the chassis for service.
1. Prepare an antistatic surface to set parts on during the removal, installation, or
replacement process.
Properties:
serial_number = AK00239918
Locate the Server
Preparing for Service 61