Table of Contents
Advertisement
Remove an External Interconnect Assembly
8.
Use a T20 driver to remove the four screws that secure the interconnect cable
cover to the chassis, and remove the cover.
From the front of the server, remove the external interconnect assembly.
9.
Caution -
Remove the assembly slowly to avoid bending or otherwise damaging them. In addition, take
care to avoid flexing or twisting these assemblies.
a.
Loosen the captive screws on the assembly.
308
SPARC M8 and SPARC M7 Servers Service Manual • September 2017
The small connector pins on the back of the assembly are susceptible to damage.
Hide quick links:
Advertisement
Table of Contents
