Locate The Server; Removing Power From The Server - Oracle SPARC S7-2 Service Manual

Related Information
"Front Panel Components" on page 11
■

Locate the Server

You can use the Locator LEDs to identify one particular server from many other servers.
1. At the Oracle ILOM prompt, type:
-> set /System locator_indicator=on
The white System Locator LEDs (one on the front panel and one on the rear panel) blink.
2. After locating the server with the blinking Server Locator LED, turn it off by
pressing the Locator button with a stylus.
Alternatively, you can type an Oracle ILOM command to turn off the Server Locator LED.
-> set /System locator_indicator=off
Related Information
"Front Panel Components" on page 11
■

Removing Power From the Server

Step
1.
2.
3.
Related Information
"Front Panel Components" on page 11
■
Servers Administration
■
Description
Prepare the server for powering off.
Power off the server by one of three methods.
Disconnect the cables from the server.
Links
"Prepare to Power Off the Server" on page 38
"Power Off the Server" on page 38
"Disconnect Cables From the Server" on page 40
Preparing for Service
Locate the Server
37