Oracle SPARC M8 Service Manual page 314

Install an External Interconnect Assembly
3. Position the interconnect cable cover on the chassis and use a T20 driver to
reinstall the four screws that secure it to the chassis.
Reseat all CMIOUs and switch units.
4.
See "Servicing CMIOUs" on page 83
5. Reseat the SP tray and reinstall the SPs or SPPs.
"Servicing SP Trays" on page 243
6. Switch on the appropriate PDU circuit breakers and power on the server.
"Returning the Server to Operation" on page
Verify that the fault has been cleared and the replaced component is operational.
7.
See "Verify That a Fault Has Been Cleared" on page
314 SPARC M8 and SPARC M7 Servers Service Manual • September 2017
and "Servicing Switch Units" on page
and "Servicing SPs" on page
73.
54.
189.
117.