Detecting And Managing Faults; Checking For Faults - Oracle SPARC M8 Service Manual

Detecting and Managing Faults

These topics explain how to monitor the server status and troubleshoot faults in the server.
Step
1.
2.
3.
4.
Related Information
"Identifying Components" on page 15
■
"Preparing for Service" on page 57
■
"Controlling the Server and Domains" on page 67
■
"Understanding Server Configurations and Failover Behavior" on page 79
■

Checking for Faults

Use these tools to identify components that require service.
Diagnostic Action
Possible Outcome
Check the server for detected faults and for information about
components that might require service.
Identify components that require service and replace them, or
continue to advanced troubleshooting.
Perform additional troubleshooting, if needed.
If log files or system messages indicate that a component
requires service, replace it.
Manage faults following a service procedure.
If a service procedure has cleared the fault, ensure that the
server is now operational. If a fault remains following a
service procedure, clear it manually.
Contact technical support if the problem persists.
Links
"Checking for Faults" on page 35
"Interpreting LEDs" on page 44
"Performing Advanced
Troubleshooting" on page 50
"Verify That a Fault Has Been
Cleared" on page 54
https://support.oracle.com
Detecting and Managing Faults 35