Servicing the Front Indicator Panel
The front indicator panel is located on the front of the CMIOU chassis for SPARC M8-8 and
SPARC M7-8 servers, and on the front of the CMIOU chassis and switch chassis for SPARC
M7-16 servers. The service procedures are the same on either chassis. For the location of the
front indicator panel, see
Front Components (SPARC M7-16)" on page
This procedure requires that you handle components that are sensitive to electrostatic
Caution -
discharge. This discharge can cause server components to fail. Follow antistatic precautions to
prevent electrostatic damage. See
These topics explain how to service the front indicator panel.
"Remove a Front Indicator Panel" on page 217
■
"Install a Front Indicator Panel" on page 222
■
Related Information
"Front Indicator Panel Controls and LEDs" on page 46
■
"Identifying Components" on page 15
■
"Detecting and Managing Faults" on page 35
■
"Preparing for Service" on page 57
■
"Controlling the Server and Domains" on page 67
■
"Understanding Server Configurations and Failover Behavior" on page 79
■
Remove a Front Indicator Panel
This procedure can be performed only by qualified service personnel.
Remove AC power using the circuit breakers on the appropriate PDU before
Caution -
performing this procedure.
"CMIOU Chassis Front Components" on page 20
23.
"Prevent ESD Damage" on page
or
"Switch Chassis
61.
Servicing the Front Indicator Panel
217