Oracle SPARC M8 Service Manual page 224

Install a Front Indicator Panel
3. Position the faceplate over the panel, install the Torx screws, and tighten the
captive screws to secure the faceplate to the panel.
Switch on the appropriate PDU circuit breakers and power on the server.
4.
See "Returning the Server to Operation" on page
5. Verify that the fault has been cleared and the replaced component is operational.
See "Verify That a Fault Has Been Cleared" on page
6. Return the replaced component to Oracle.
224 SPARC M8 and SPARC M7 Servers Service Manual • September 2017
73.
54.