2.
Secure the power supply in the chassis.
a.
Press on the center of the power supply grill until the lowered latch lever
moves upward.
Shown by the No. 1 arrow in the preceding illustration.
Lift the lever up and press the lever against the power supply to fully seat it
b.
in the server.
Shown by the No. 2 arrow in the preceding illustration.
Verify that the fault has been cleared and the replaced component is operational.
3.
See
"Verify That a Fault Has Been Cleared" on page
4.
Return the replaced component to Oracle.
See
"Prepare a Component for Return to Oracle" on page
Install a Power Supply
54.
64.
Servicing Power Supplies
177